Carrier AGATWNPME01B Installation Instructions Manual page 9

AGATWNPME01B: Installation Instructions
EXTERNAL EXTENSION
TWINNING HARNESS
30 IN. (762mm) MIN
WORK AREA
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
COMBUSTION AIR
INTAKE
MANUAL
SHUTOFF
GAS VALVE
SEDIMENT
TRAP
Fig. 11 – Platform Installation of Condensing Furnace
30" (762 mm)
WORK PLATFORM
SEDIMENT TRAP
EXTENSION HARNESS
GAS SUPPLY SHUT-OFF
SEDIMENT TRAP
Representative drawing only, some models may vary in appearance.
Fig. 12 – Platform Installation of Non-Condensing Furnace
2"
CONDENSATE
TRAP
GAS SUPPLY SHUT-OFF GAS PIPE UNION
GAS PIPE UNION
17-3/4" (451 mm) OVER ALL
4-3/4" (121 mm) UNDER DOOR
1" (25 mm) UNDER FURNACE
EXTEND OUT 12" (305 mm)
FROM FACE OF DOOR
1"(25 mm)
4-3/4"(121 mm)
SHEET METAL
12" (305 mm)
22" (556 mm)
9
VENT
COMMON RETURN
30 (762mm) MIN
WORK AREA
ACCESS OPENING
FOR TRAP
ROLLOUT PROTECTION REQUIRED
INSTALL 12" X 22" (305 X 559mm)
SHEET METAL IN FRONT OF BURNER
COMPARTMENT AREA.
30" (762 mm)
WORK PLATFORM
L11F0101
L14F013