Alert Settings - ViewSonic PJ1173 User Manual

Configuring and controlling the projector via a web browser (continued)

Alert Settings

Displays and configures failure & alert settings.
Alert Item
Cover Error
Fan Error
Lamp Error
Temp Error
Air Flow Error
Lamp Time Error
Cold Error
Filter Error
Other Error
Schedule Execution
Error
Lamp Time Alarm
Filter Time Alarm
Transition Detector
Alarm
"CHANGE THE LAMP" is
displayed.
Cold Start
Authentication Failure
Refer to "Troubleshooting" in the User's Manual (detailed) – Operating Guide for
further detailed explanation of Error except Other Error and Schedule Execution Error.
ViewSonic
Management with Web browser software
The lamp cover has not been properly fixed.
The cooling fan is not operating.
The lamp does not light, and there is a possibility that interior
portion has become heated.
There is a possibility that the interior portion has become
heated.
The internal temperature is rising.
Lamp time over.
There is a possibility that the interior portion has become
overcooled.
Filter time over.
Other error.
If displaying this error, please contact ViewSonic.
Schedule Execution error.
Lamp time over Alarm Time setting.
Filter time over Alarm Time setting.
Transition Detector Alarm.
"CHANGE THE LAMP" is displayed.
The Power switch is turned on.
(Off → standby mode)
The SNMP access is detected from the invalid SNMP
community.
77
Description
PJ1173