Logon - ViewSonic PJ1173 User Manual

Configuring and controlling the projector via a web browser (continued)

Logon

Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
) Enter "http://192.168.1.10/" into the address
bar of the web browser and press "Enter"
key or click "Go" button. The screen in Fig.
3..a will be displayed.
2) Enter your ID and password and click
[Logon].
Below are the factory default settings for administrator ID, user ID and passwords.
Item
Administrator
User
If the logon is successful, either the screen will be displayed.
Main menu
"Logon with Administrator ID"
3) Click the desired operation or configuration item on the main menu located on
the left-hand side of the screen.
ViewSonic
ID
Administrator
User
Management with Web browser software
Password
<blank>
<blank>
Main menu
"Logon with User ID"
7
"Logon Menu"
PJ1173