Siemens LD97DBM69B Instruction Manual page 7

en Getting to know your appliance
*Getting to know your
appliance
H ere, you can get to know your appliance and receive
G e t t i n g t o k n o w y o u r a p p l i a n c e
information about the accessories.
(
Control panel
0 Lighting
8 Filter cover
Control panel
Symbol Explanation
# Retracts/extends the appliance, switches the fan on/
off
0 Switches on the fan
1 Switches on fan setting 1
2 Switches on fan setting 2
3 Switches on fan setting 3
Switches on intensive mode 1
2ò
Switches on intensive mode 2
2ñ
Switches on the fan run-on
x
Saturation indicator
!
Switches the lighting on/off
=
18
KBefore using for the first
time
B efore you can use your new appliance, you must
B e f o r e u s i n g f o r t h e f i r s t t i m e
apply certain settings.
Initial use
Switching over the display for circulating-air mode
For air recirculation mode, the electronic controller's
display must be switched over accordingly:
Check whether the extractor hood is connected and
1.
switched off.
#
Touch .
2.
Touch 0.
3.
Touch and hold ! for at least 3 seconds.
4.
!
will flash; the electronic controller has now been
switched over to air recirculation mode.
Switching over the display for exhaust air mode
Check whether the extractor hood is connected and
1.
switched off.
Touch # .
2.
Touch 0.
3.
Touch and hold ! for at least 3 seconds.
4.
!
will be lit; the electronic controller has now been
switched over to air extraction mode.