Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens LC98BE542
Summary of Contents for Siemens LC98BE542
- Page 1 Extractor hood siemens-home.com/welcome Register your product online...
-
Page 2: Table Of Contents
This appliance is not intended for operation with an external clock timer or a remote Produktinfo Additional information on products, accessories, control. replacement parts and services can be found at www.siemens-home.com and in the online shop www.siemens-eshop.com (Important safety information 8Intended use Warning Read these instructions carefully. - Page 3 Important safety information en Always ensure adequate fresh air in the room Warning if the appliance is being operated in exhaust Risk of fire! air mode at the same time as room air- Grease deposits in the grease filter may ■...
-
Page 4: Environmental Protection
Environmental protection Warning 7Environmental protection Risk of electric shock! A defective appliance may cause electric ■ Environmentally-friendly disposal shock. Never switch on a defective t e c t i o n E n v i r o n m e n t a l p r o appliance. -
Page 5: Operating The Appliance
Operating the appliance en Lighting 1Operating the appliance The lighting can be switched on and off independently of the fan. These instructions apply to several appliance variants. It p l i a n c e O p e r a t i n g t h e a p is possible that individual features are described which Press the button. - Page 6 Operating the appliance Control panel model 2 Saturation display When the metal mesh grease filters or the activated Control panel carbon filter are saturated, a signal sounds for approx. 4 seconds after the fan is switched off. In addition, the corresponding symbol appears in the display: Explanation Metal mesh grease filter:...
- Page 7 Operating the appliance en Setting the fan Lighting The lighting can be switched on and off independently Switching on the appliance of the fan. Press the button. Press the button. ■ The fan starts at setting ƒ Setting the brightness Press the + or - button to change the fan strength.
-
Page 8: Cleaning And Maintenance
Cleaning and maintenance 2Cleaning and maintenance Warning t e n a n c e C l e a n i n g a n d m a i n Area Cleaning agents Risk of burns! The appliance will become hot during operation, Glass Glass cleaner: especially near the bulbs. -
Page 9: Trouble Shooting
Trouble shooting en Removing metal grease filter Malfunction table Open the lock and fold down the metal grease filter. Problem Possible cause Solution While doing this, place the other hand under the The appliance The plug is not Connect the appliance to the metal grease filter. -
Page 10: Customer Service
Customer service Basic equipment: Starter set for circulating-air mode - 4Customer service wide When calling us, please give the product number (E C u s t o m e r s e r v i c e no.) and the production number (FD no.) so that we can provide you with the correct advice. -
Page 11: Installation Instructions
Important safety information en INSTALLATION INSTRUCTIONS (Important safety Installation instructions information Read these instructions carefully. Only then i n f o r m a t i o n I m p o r t a n t s a f e t y will you be able to operate your appliance safely and correctly. - Page 12 Important safety information Warning Risk of fire! Grease deposits in the grease filter may catch fire. The specified safety distances must be observed in order to prevent an accumulation of heat. Observe the specifications for your cooking appliance. If gas and electric hobs Room air-dependent heat-producing appliances (e.g.
-
Page 13: General Information
General information en Electrical connection KGeneral information Warning Exhaust air mode Risk of electric shock! i o n G e n e r a l i n f o r m a t Components inside the appliance may have sharp edges. -
Page 14: Installation
Installation Installation 5Installation Screw on the fixing bracket for the flue duct. ¨ Preparing the installation I n s t a l l a t i o n Caution! Ensure that there are no electric wires, gas or water pipes in the area where holes are to be made. Mark a vertical centre line on the wall from the ceiling to the lower edge of the extractor hood. - Page 15 Installation en Attaching and aligning the appliance Connecting the pipes First, remove the protective foil from the back of the If using an aluminium pipe, smooth the Note: appliance and, following installation, remove the foil connection area beforehand. completely. Exhaust-air pipe Ø 150 mm (recommended size) When attaching the appliance, ensure that it engages firmly with the brackets.
- Page 16 BSH Hausgeräte GmbH Carl-Wery-Straße 34, 81739 München, GERMANY siemens-home.com *9001016815* 9001016815 941103...