Setting-Camera-Ptz Settings - Honeywell 30 Series User Manual

30 Series Network Video Recorder User Guide
Figure 6-17 Motion Detection
Note
To set up a detection window:
1. Select a camera by a single click in the camera list.
2. Click and drag to draw a rectangular detection window.
3. Pull the detection area level up to a preferred position. An object must be larger than the
detection area to trigger an alarm.
4. Select a Sensitivity level using the slide bar.
5. Click Apply for the configuration to take effect.

Setting-Camera-PTZ settings

Please see Configuring PTZ Settings
40
Up to 5 ROI windows can be created for a camera.
on page 17.