Timeline Bar - Honeywell 30 Series User Manual

Figure 5-6 Search and Playback
6. Click the camera again to deselect it and select another one to playback if needed.
Note

Timeline Bar

By default, the playback starts from the beginning of a day's recording. While playing the
recorded video, click on the timeline to replay a point in time in the video.
Figure 5-7
Table 5-1 Timeline Bar
Buttons Description
•
If a camera is deleted from the NVR, the recorded videos cannot be
searched until it is added to the NVR.
•
In case of four cameras playback simultaneously, the maximum
resolution of each camera is 1080P.
Playing Back and Search Videos
23