General
Connectivi-
ty issues
Setting Up
42
What is the
significance of the
camera LED?
I am not able to
access my Camera.
During setup on de-
vices for Android™
and iOS, I am not
able to find my
Camera during the
last step and the
setup fails.
The LED indicates the
following status:
LED flashing Red: Your
Camera is booting up. After
a voice prompt the camera
is booted up and ready for
pairing.
LED Cycling Blue/Red: Your
camera is in pairing mode.
LED Solid Blue: The camera
is paired and set up to your
account.
LED Flashing Blue: The
camera is live streaming.
LED Off - No Power to
camera.
Please check if the Camera
is within Wi-Fi® range. Please
try to move the Camera
closer to the router for
better Wi-Fi® connectivity
and try again.
Please reset the Camera to
setup mode and try again.
Press and hold the PAIR
button on the side of the
camera until you hear a beep
and voice prompt 'Ready for
pairing'. When the Camera
LED is off, this indicates that
it is in setup mode. Now
restart the setup from your
smartphone again.
Help