Using The Baby Monitor; Setting Up; Power On Or Off The Baby Unit; Power On Or Off The Parent Unit - Motorola COMFORT60CONNECT User Manual

3. Using the Baby Monitor

Please read these instructions carefully, and be aware that this
baby monitor is only intended as an aid. It is not a substitute for
responsible adult supervision.
3.1

Setting Up

• Make sure that the Baby Unit and Parent Unit are both switched
on.
• Place the Baby Unit in a convenient location (e.g. on a table) and
point the camera lens towards the area you want to monitor.
NOTE
Do not place the Baby Unit within reach of a child or baby! If there
is interference with the picture or sound, try moving the units to
different locations, and ensure that they are not close to any other
electrical equipment.
If you place the Parent Unit and Baby Unit too close together, you
may hear a high pitched noise. This is not a fault. The units are
designed to be operated at some distance apart. So move the units
further apart.
3.2

Power On or Off the Baby Unit

Slide the Power
the Baby Unit. The power indicator lights up in blue.
Slide the Power
the Baby Unit. The power indicator goes off.

3.3 Power On or Off the Parent Unit

Press and hold the Power 0 button to switch on the Parent Unit. The
power indicator lights up in green.
Press and hold the Power 0 button to switch off the Parent Unit. The
power indicator goes off.
Using the Baby Monitor
switch to the ON position to switch on
ON OFF
switch to the OFF position to switch off
ON OFF
13