Draper 82384 User Manual

Socket & voltage tester set

Table of Contents

Download this manual

SOCKET & VOLTAGE

TESTER SET

82384

These instructions accompanying the product are the original instructions. This document is part of the product,

keep it for the life of the product passing it on to any subsequent holder of the product. Read all these

instructions before assembling, operating or maintaining this product.

This manual has been compiled by Draper Tools describing the purpose for which the product has been

designed, and contains all the necessary information to ensure its correct and safe use. By following all the

general safety instructions contained in this manual, it will ensure both product and operator safety, together

with longer life of the product itself.

AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

product.

Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper

Tools policy of continuous improvement determines the right to make modifications without prior warning.

Table of Contents

Need help?

Do you have a question about the 82384 and is the answer not in the manual?

Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Page 2 Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.
Page 3 CONTENTS - 3 -...
Page 4 This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.
Page 5 6.1 IDENTIFICATION 230V / 50HZ Lamp 1 Lamp 2 Lamp 3 Code table Stock No.82384 DTL SO53 1YF. UK. Instruction for the Coding Table: Rated voltage ....... 230V/50Hz Left column represents the on/off state of the Lamp 1. Correct Middle column represents the on/off state of the Lamp 2.
Page 6 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.