Loading Paper - Canon imagePROGRAF TM-305 Setup Manual

Loading Paper

Load the paper for adjustment.
1 When Select the paper on which to
print the print head alignment pattern.
appears on the touch screen, select
Manual.
The touch screen shows instructions on
how to load cut sheets.
4 Insert the paper straight into the feed slot,
with the printed side facing up, so that the
right edge of the paper is aligned with the
paper alignment guide (A) on the right
side of the roll paper cover.
Insert the paper until the edge makes
contact and you hear 2 short beep
sounds.
• This printer allows only 1 sheet to
be loaded. Do not load 2 or more
Important
sheets. Doing so may cause a
paper jam.
• If the paper is wavy or warped, it
may cause a paper jam. Flatten out
the paper before loading it.
2 Slide the width guide (A) to align it with a
marker indicating the size of the loaded
paper. In this example, align the guide
to A2, which is the size of the provided
paper for adjustment.
5 Adjust the position of the width guide (A)
according to the size of the loaded paper.
Align the width guide exactly with the
paper to avoid the loaded paper from
tilting or crinkling.
A
A
9
3 Prepare 1 sheet of paper for adjustment.
Identify the printed side by referring to
the bag in which the paper came.
• Return unused paper to the bag
in which it came and store it
Important
away from high temperature, high
humidity, and direct sunlight.
A
6 The screen for selecting the paper type
appears. Select the type of paper you
loaded.
In this example, select Coated papers
and then Coated papers.
The paper starts feeding.