Materials For Installation - Huawei SVN2000 Series Quick Installation Manual

Materials for Installation

You can install the device in a cabinet or on a workbench.
If a workbench is adopted, you just need to place the device on it
This document describes how to install the device to a cabinet an
Besides the chassis, mounting ears, and guide rails, the following Besides the chassis mounting ears and guide rails the following
supported, refer to the Hardware Description. You can purchase
From left to right: captive nut, M6 screw, M4 screw
The numbers of captive nuts and screws vary with installa
DC power cable
Console cable
LC-LC single-mode optical fiber
t if it is clean. For details, refer to the Installation Guide.
nd materials required.
g materials are used in this example. For interface cards g materials are used in this example For interface cards
and install interface cards and complimentary cables as required.
tion modes.
AC powe er cable
Network k cable
LC-PC multimo ode optical fiber
4 4
PGND cable
Cable-retention clip
SFP optical module