Huawei FusionServer Pro 1288X V5 Server
Technical White Paper
Parameter
operati
ng
speed
(MT/s)
● a: The maximum number of DDR4 memory modules is based on dual-
● b: The maximum DDR4 memory capacity varies depending on the processor
● c: DPC (DIMM per channel) indicates the number of DIMMs per channel.
● d: If the Cascade Lake processor is used, the maximum operating speed of a
5.4.4 Memory Installation Guidelines
●
●
Issue 02 (2020-04-20)
Specifications
2DPC
2666
processor configuration. The value is halved for a server with only one
processor.
type. The value listed in this table is based on the assumption that memory
modules are fully configured.
memory module can reach 2933 MT/s. If the Skylake processor is used, the
maximum operating speed of a memory module can reach 2666 MT/s only.
Observe the following when configuring DDR4 memory modules:
–
Install memory modules only when corresponding processors are
installed.
–
Do not install LRDIMMs and RDIMMs in the same server.
–
Install filler memory modules in vacant slots.
Observe the following when configuring DDR4 memory modules in specific
operating mode:
–
Memory sparing mode
▪
Comply with the general installation guidelines.
▪
Each memory channel must have a valid online spare configuration.
▪
The channels can have different online spare configurations.
▪
Each populated channel must have a spare rank.
–
Memory mirroring mode
▪
Comply with the general installation guidelines.
▪
Each processor supports two integrated memory controllers (IMCs).
At least two channels of each IMC are used for installing memory
modules (channels 1 and 2, or channels 1, 2, and 3). The memory
modules installed must be identical in size and organization.
▪
For a multi-processor configuration, each processor must have a
valid memory mirroring configuration.
–
Memory scrubbing mode
Copyright © Huawei Technologies Co., Ltd.
2666
2666
5 Hardware Description
2666
2666
2666
22