Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Thermo Electron HAAKE Phoenix II P1
Summary of Contents for Thermo Electron HAAKE Phoenix II P1
- Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
- Page 2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 3: Table Of Contents
Thermo Electron (Karlsruhe) GmbH ..Thermo Electron (Karlsruhe) Test Certificate for HAAKE Phoenix II P1 ..Safety Notes ....... . - Page 4 ..... Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 5 ........Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 6: Key To Symbols
1.3 Symbols used on the unit (rear) Pump connection: back flow (suction) from the external object. Pump connection: pressure to the external object. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 7: Symbols Used On The Display
For this function the identification has to be activated (“Settings„ / “Control„ menu). Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 8 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 9: Quality Assurance
Quality Assurance Quality Assurance Dear customer, Thermo Electron (Karlsruhe) implements a Quality Manage- ment System certified according to DIN/EN/ISO 9001:2000. This guarantees the presence of organizational structures which are necessary to ensure that our products are devel- oped, manufactured and managed according to our custom- ers expectations. -
Page 10: Thermo Electron (Karlsruhe) Gmbh
Contacts at Thermo Electron (Karlsruhe) GmbH Your Contacts at Thermo Electron (Karlsruhe) GmbH Please get in contact with us or the authorized agent who supplied you with the unit if you have any further questions. Thermo Electron Corporation International / Germany... -
Page 11: Thermo Electron (Karlsruhe) Test Certificate For Haake Phoenix Ii P1
This is to certify that the tempering device which you have acquired and to which these instructions for operation refer has been tested and equilibrated by Thermo Electron (Karls- ruhe) GmbH in compliance with the regulations of a certified Quality Assurance System according to DIN ISO 9001. -
Page 12: Safety Notes
EN 60601-1: 1990 (DIN VDE 0750-1 and IEC 601-1) and should not be operated in rooms used for medical pur- poses and/or in the vicinity of patients. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 13 Safety Data Sheet according to directive 91/155/EEC. • Read relevant regulations concerning dangerous materials. • Observe relevant guidelines for laboratories in your country. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 14 Complete separation means: Pull out the mains plug! Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 15: Unit Description
⇒ ⇒ Pump blocked: poss. fire danger ⇒ Or also: Excess temperature protection level not correctly set: poss. fire danger ⇒ Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 16: Safety Class 3 According To Din 12876
250°C. Mains cables may be changed only from autho- rized technical personnel. Warning for maintenance personnel: Use with the replacement an original Thermo Electron spare part (cable)! (Please get in contact with Thermo Elec- tron service department.) Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... -
Page 17: Unpacking / Setting Up
Blocked ventilation grids lead to increased unit heating which in turn reduces the cooling capacity and thus impairs correct functioning. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 18: Information Concerning The Ce Sign
For this reason we recommend you to observe a minimum distance of approx. 1 m from such units. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 19: Mounting Onto Baths And Bath Bridges
Guide the unit down into the opening in a curve. Do not damage Floats, possibly easily raise. Attach the unit with 2 screws. (Order no. 003-6401) Tighten only by hand. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 20: Functional Elements
Symbol: Read the instruction manual! Mains switch Excess temperature setting 10 control keys to the function and menu selection LC display Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 21: Rear Phoenix Ii P1
Pump outlet: pressure to the external object Mains cable (coolers with control cable) Fuses (not in conjunction with refrigerated baths), if the fuses are triggered, see chap.12.4 Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 22: Bath Vessel B5 (Example Model For B7 And B12)
All bath containers contain an additional tap water cooling coil (for hoses with 8 mm inner ø). The flow direction of the water can be freely selected. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 23: Refrigerated Bath C25P (Example Model C20P, C35P, C40P, C41P, C50P And C75P)
Fuses (if the fuses are triggered, see chap. 12.4) Mains cable Connection for combined mains connection and control cable 19 of Phoenix Symbol: Read the instruction manual! Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 24: Hoses
Please select the proper hoses from the following table. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 25: Plastic And Rubber Hoses
8 or 12 mm ∅ which are attached to the pump nozzle A with the coupling nut E. For the isolation it is highly recommended to use the foam rubber isolation. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 26: Metal Hoses
Hoses 9.2.2 Metal hoses Thermo Electron metal hoses (stainless steel insulated) of- fer a particularly high degree of safety and are suitable for both low and high temperatures. The metal hoses are attached directly to the nozzle A, gas- kets are not required. -
Page 27: Tap Water Cooling
The actual temperature will rise above the set temperature if the water flow is insufficient. If so in- crease the water flow. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 28: Pressure Pump
When a safety element causes a shut off, the si- phoning of one of the vessels cannot be prevented. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 29: Filling With Bath Liquid
C25P, C40P and C41P. Unfortunately SIL180 has a creeping tendency necessitat- ing the occasional cleaning of the bath cover. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 30 Their flash point is at about 10°C. Therefore, they cannot be used in accordance with the standards EN 61010 or DIN 12879. other Thermo Electron offers a range of heat transfer liquids for temperatures these temperature control applications. Synth ... : Synthetic thermal liquid with a medium life span (some months) and little smell annoyance.
- Page 31 ! Important ! At bath temperatures of over 200°C the usage of a heat take-off is recommended. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 32 Light- - Rubber Copper Copper metals Silicone Light- Light- Zinc metals metals Bronze Bronze 0226 0225 no sp. = no specifications Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 33: Filling With Heat Transfer Liquid
Replenish the liquid. Reset the unit: Depress the reset button. ⇒ The unit goes to the basic condition. Repeat this action if necessary. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 34: Draining
Hot Baht liquid or very cold bath liquids should not be drained! When certain conditions make drain- ing necessary, please act safety conscious: Wear protective clothing and protective gloves! Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 35: Connecting Up
The mains cable wires have the following colors: Brown Live Blue Neutral Green/Yellow= Earth Note amperage on rating plate! Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 36: Fuses On The Unit
If the fuse should be triggered again after resetting, the unit probably has a defect. In this case the unit should be sent in for servicing. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 37: Configuration
If the beep is switched on, there is an acoustic signal each time you press a key. Back 39 : LCD --contrast settings Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 38: Reset
10 : Settings unit time/date The actual values are shown in the bottom line. dd . y y y y 33 : Input date Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 39: Language
Additional heating switches on again. Back 13 : Settings unit multi funct. port Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 40: Setting Regulation
This function only has a meaning when the optional analog interface box is connected to the 7: Settings interface RS232C interface. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 41: Setting Status
Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 42: Operating
Controlling can be stopped by pressing the „Stop“ key in the main menu. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 43: Setting The Desired Set Value
To deactivate the identification, select ”Settings” and ”Con- trol”. Switch ”Identification” to ”OFF”. To switch off the identification please see chapter 14.5 . Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 44: Setting The Rta System Correction Value
„Set values“ submenu first. The changed set value is stored permanently and is acti- vated immediately. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 45: Ramp Functions
A new empty line is added automatically to the table of the temperature program when a segment has been entered completely. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 46: Viewing Stored Programs
With the function „Beep“ you can select whether a signal sounds after the end of each segment, after the end of each ramp or if there is no signal. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 47: Running A Temperature Program
When restarting the program, the unit heats/ cools, until the start temperature ± the set variation is reached. Then the program starts again with the first segment. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 48: Example Of A Program
(i.e. set and actual temperature) intersect. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 49 The times of segments no. 3 and no. 4 should be extended so that the circulator can keep the given values. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 50: Working With Internal Or External Control Sensors
If you would like to shorten this, select „medium“ or „fast“. When using the setting „fast“ you should reckon with quicker control times. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 51: Differential Control
The follower control can be activated only with attached Pt100--Sensor. It is closed, if a temperature specification via I/O port is available. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 52: Working With Or Without Cooling
The minimum and maximum limit values that can be set de- pend on the unit combination. (operating temperature ranges see Technical Specification) Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 53: Controlling Heating And Cooling
To restart the controller, the Stop function must be activated in the main menu, followed by the Start function. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 54: Excess Temperature Protection
Additional protection, e.g. of a biological sample. The cut-off point should be set as close as possible to the desired temperature value. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 55: Setting The Excess Temperature
The set overtemperature value can be read off at any time in the ”Settings / Status” menu. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 56: Fault Displays
If the circulator switches off again after a short ⇒ Set value 40.00 time, return the unit for servicing! ° C ALARM Pump 17:00:00 17.11.00 Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 57: Sensor Breakage Or Short Circuit
17:00:00 17.11.00 16.6 External fault RS232C The circulator has been switched to fault status via the interface. ⇒ Check the external system. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 58: Error In Connection With Cooling Units
⇒ The reset key must be pressed in order to start up the unit again. ALARM disappears on the display and the unit can be operated again. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 59: Testing The Safety Features
If not the unit must be checked over by qualified service per- sonnel. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 60: External Connections
Do not connect external mass or voltage supply! The shorting bridge at Pin 3 and 4 must be removed before connecting the external alarm circuit. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 61: External Pt100 Sensor
The complete contact of the shielding within the plugs is of special importance. Insufficient contact may lead Attach shielding plane to noise penetration and result in performance errors. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 62: Rs232C Interface
Cable (9-pin to 9-pin) 9 pin socket 9 pin socket RxD(Received Data) TxD(Transmitted Data) CTS(Clear to Send) RTS(Request to Send) Signal ground Circulator Computer Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 63 Cable (25 pin to 9 pin) 25 pin socket 9 pin socket RxD(Received Data) TxD(Transmitted Data) CTS(Clear to Send) RTS(Request to Send) Signal---Masse Circulator Computer Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 64: Interface Parameter
The saved parameters will be listed in the first line. Changes will be done in the following line. All these transfer parameters cannot be altered via the interface. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 65: Requirements Made Of External Units
The interfaces can be controlled by the user either via a BASIC program or a higher programming language (under DOS) or via the Windows-Terminal (under Winwows 3.1x). Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 66: Sets Of Commands
If you have already controlled a circulator HAAKE DC50 via the PC you can use the same set of commands for the circu- lators of the Phoenix II line. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 67 20.01 (no comma!!!) Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 68 R_XT Call up time R_XD Call up date W_XD_ Select time <HH>_<MM>_<SS> W_XD_ Select date <DD>_<MM>_<YY> ” _ ” = blank Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 69 0 to 100 % lock Keyboard W_SP_0 W_SP_1 ” _ ” = blank Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 70 Before starting a segment first enter W_ASxx. Then the circulator runs to the start tem- perature of the segment. ” _ ” = blank Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 71 Answer „ XR_< program no. >_< segment no. >_< segment remain time >_ < setpoint step >_< actual ramp setpoint >_< segment end temperature > „ ” _ ” = blank Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 72: Operating Status / Error Message
Liquid level OK Alarm overtemperature Temperature OK Main relay missing Main relay present External control Internal control Temperature control ON Temperature control OFF Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 73: Example Definition Of A Ramp Program By Pc
This means that the end temperature of segment i must be the start temperature of segment i+1. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 74 W SN6 W SP 5 185.0 205.0 240 W SA W SN7 W SP 6 205.0 205.0 180 W RS 3 Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 75 The times of segments no. 3 and no. 4 should be extended so that the circulator can keep the given values. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
-
Page 76: Cooling
(ice) on the condenser. This reduces the refrigeration output. • Low mains voltage reduces the output of the refrigeration unit. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 77: Maintenance
Therefore: The units contain the ozone-friendly coolants R134a, R404A or R23. The units may however only be discarded by authorized personnel. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 78: Disassembly Of Temperature Control Module And Bath Vessel
Unscrew the 2 screws (Order no. 003-6401). Incline the unit slightly whilst lifting it. Lift the float to avoid any damage. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 79: Technical Specifications
230 V / 50..60 Hz 440--0051 440--0071 440--0121 440--0071 440--0121 for 115 V / 60 Hz 440--0052 440--0072 440--0122 440--0072 440--0122 Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 80: Refrigerated Circulators
Total wattage 230 V / 115 V 2500 Order no. for 230 V / 50 Hz 440--0751 for 220 V / 3 Ph / 60 Hz 440--0759 Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 81: Fuse Values
2x10A / 2x16A C75P 230V/50Hz 2x10A / 2x16A 200V/50--60Hz 2x10A / 2x16A Part no. 011-0870 Subject to alterations Printed in Germany (FRG) 1.1.095.2--02.2004 Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... -
Page 82: Appendix
I.e. with this interface you can • define set values (voltage and current input) and simul- taneously Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com... - Page 83 RT1 and RT2 can be seen in the display with the associated correction values RT1 and RT2. For T1, define the temperature value at which the devi- Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 84 In order to end the entry via the analog connection, you deac- tivate the analog interface in the „Settings“ / „Interfaces“ menu. Version 3.07 HAAKE Phoenix II P1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
- Page 85 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
Need help?
Do you have a question about the HAAKE Phoenix II P1 and is the answer not in the manual?
Questions and answers
Hello, How do i set the temperature to maintain 25.0 C
To set the temperature to maintain 25.0 °C on a Thermo Electron Phoenix II P1:
1. Select "Set values" in the main menu.
2. Press the function key for the set temperature (S1–S4) you want to change.
3. Activate "Change set value."
4. Use the plus/minus key to select the sign.
5. Enter 025.00 using the number keys (3 digits before and 2 after the decimal).
6. Confirm the entry when prompted to activate the value.
This answer is automatically generated