Page 2
This instruction manual is intended for use with the model(s) listed on the front cover. It is necessary not only for installation but for subsequent maintenance and troubleshooting. Please keep it in a safe place for future reference. 172-65231A-02 (DC7) 24 Mar 2017...
Page 3
• The three types of cautionary items above are very important for safety: be sure to observe all of them as they relate to installation, use, maintenance, and repair. Furthermore, TLV accepts no responsibility for any accidents or damage occurring as a result of failure to observe these precautions.
Page 4
Use only under conditions in which no water hammer will occur. The impact of water hammer may damage the product, leading to fluid discharge, which may cause burns or other injury. 172-65231A-02 (DC7) 24 Mar 2017...
Page 5
PRESSURE SHELL DESIGN CONDITIONS, NOT OPERATING CONDITIONS. **Valve No. is displayed for products with options. This item is omitted from the nameplate when there are no options. Configuration Separator Outlet Name Body Separator Separator Body Under Cover Baffle Nameplate Condensate Outlet 172-65231A-02 (DC7) 24 Mar 2017...
Page 6
5. The product should be inclined no more than 10° horizontally and front-to-back. 6. Install an air trap, steam trap or drain trap at the Tolerance Angle for Installation: 10° condensate outlet. Use of the TLV free float type trap is advised. 7. To facilitate inspection and maintenance, install...
Page 7
EXPRESS LIMITED WARRANTY Subject to the limitations set forth below, TLV Corporation, a North Carolina corporation (“TLV”) warrants that products which are sold by it or TLV International, Inc., a Japanese corporation (“TII”), which products (the “Products”) are designed and manufactured by TLV Co., Ltd., a Japanese corporation (“TLVJ”), conform to the specifications published...
Page 8
TRANSPORTATION COSTS ASSOCIATED WITH THE RETURN OR REPLACEMENT OF THE CLAIMED DEFECTIVE PRODUCT ARE SOLELY THE RESPONSIBILITY OF BUYER OR THE FIRST END USER. TLV RESERVES THE RIGHT TO INSPECT ON THE FIRST END USER’S SITE ANY PRODUCTS CLAIMED TO BE DEFECTIVE BEFORE ISSUING A RETURN MATERIAL AUTHORIZATION.
Need help?
Do you have a question about the DC7 and is the answer not in the manual?
Questions and answers