Bristan WMNT11 C Installation Instructions And User Manual

Bristan WMNT11 C Installation Instructions And User Manual

Wall mount 11 first fix kit

Advertisement

Installation Instructions
and User Guide
Wall Mount 11 First Fix Kit
Model covered: WMNT11 C
Model covered:
Model covered:
Model covered:
Please keep this booklet for future
Reference.
Installer, when you have read these
instructions please ensure you leave them
with the user.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WMNT11 C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bristan WMNT11 C

  • Page 1 User Guide Wall Mount 11 First Fix Kit Model covered: Model covered: Model covered: Model covered: WMNT11 C Please keep this booklet for future Reference. Installer, when you have read these instructions please ensure you leave them with the user.
  • Page 2 General Information Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting instructions have been created to give you all of the information you need and, if you need any further help, please do not hesitate to give us a call on 0844 701 6273.
  • Page 3 Installation 1. Choose position 1. Choose position 1. Choose position 1. Choose position 230mm Choose the position where the wall mount fixing will be installed. Mark a 230mm x 50mm rectangle on the plaster board wall surface where the wall mount fixing is to be fitted. Warning: Warning: Please check for any Warning:...
  • Page 4 Installation 4. Secure backplate 4. Secure backplate 4. Secure backplate 4. Secure backplate The backplate has two methods of fixing. a) Tighten backplate fixing lugs a) Tighten backplate fixing lugs a) Tighten backplate fixing lugs a) Tighten backplate fixing lugs Tighten the two screws in the middle of the backplate and the two screws either side of the inlet holes.
  • Page 5 Installation 6. Fit olive and connector 6. Fit olive and connector 6. Fit olive and connector 6. Fit olive and connector Place the olives over the protruding supply pipework. Screw the threaded fixing bridge connectors onto the backplate until just tight and then tighten a further ½...
  • Page 6 Guarantee Bristan offers solid guarantees to provide *Labour provided by an approved Bristan engineer. Guarantee only applies to products you with complete peace of mind. with a manufacturing fault. A deferred payment will be necessary in order to secure Taps and Mixers...
  • Page 7 Our service staff are fully qualified to advise on correct installation procedures and will be able to diagnose whether the fault will require a replacement part or a visit from a Bristan engineer. If required, a service call will be booked and either yourself or an appointed representative (who should be a person of 18 years or over) must be present during the visit.
  • Page 8 Part Number: WMNT11 C Issue: D2 Bristan Group Ltd. Birch Coppice Business Park Dordon Tamworth Staffordshire B78 1SG Web: www.bristan.com Email: enquire@bristan.com A Masco Company...

Table of Contents