Texas Instruments TI-92 Installing Instruction page 5

Installing Texas Instruments TI-92 Motherboard
© 2010 iFixit — CC BY-NC-SA
Step 7
Using the same Phillips screwdriver, unscrew the
remaining three 11.8mm screws.
Step 8
Using the Ipod Opening Tool pull up on both sides of
the rectangular module while keeping the rest of the
calculator flat on a surface face down
You may get a lot of resistance from the
module. Do not use too much force as you
risk damage. Use small amounts of force to
work the module out.
www.iFixit.com Page 5 of 7