Table of Contents
Advertisement
Lambda Labs - Professional Acoustics
Z
DANGER!
Z
DANGER!
Z
DANGER!
Z
ATTENTION!
Z
ATTENTION!
Z
DANGER!
Z
DANGER!
!
DANGER!
Z
DANGER!
www.lambda-labs.com
Inspection of electrical items!
Check ALL electrical devices such as cables and Powercon sockets which are involved in
the operating process before every use! Even with the slightest doubts about the function
and safety of any components, these should not be used! Inspect all electrical items &
components regularly!
Power line!
Always ensure, that the power line is sufficient, stable and safe. Make sure the power
outlet is capable of delivering the needed power and fulfill the safety regulations. Always
check for the correct Pinout of the 5 pin 32A 400V power outlet before connection!
Cabling!
Lay down all cables with care. Additionally, secure the cables with duct tape or cable
bridges and mark them for safety reasons. Do not place anything on the cables of the
device! Use intact power cords only! Use only high-quality commercially-available cables!
The use of power cables and power distributions with insulated or missing protective earth
conductor is strictly forbidden!
Neutrik PowerCON!
Neutrik PowerCON is a connector without breaking capacity, therefore the powerCON
should not be connected or disconnected under load or live!
Neutrik SpeakON!
Neutrik SpeakON is a connector without breaking capacity, therefore the SpeakON should
not be connected or disconnected under load or live!
Setup environment!
Keep the device dry and avoid the contact to heavy dust, salt, sand and prolonged exposure
to intense sunlight or strong vibrations and impact. For safety reasons, it is not allowed to
place any liquid containers on or near to the Amplifier Rack!
Placement & interaction with other devices!
The device should not be placed near any heat producing sources or exposed to extremely
high temperatures or temperatures below zero degrees Celcius. Sufficient ventilation
should be provided when operating the amplifier units! Do not block any ventilation
openings! Never use the Amplifier Rack with closed doors! The Amplifier Rack should
always be protected from rain and fluids! Do not use the Amplifier Rack near water!
Safe stand on suitable underground!
Always ensure a good stability of the Amplifier Rack, especially when stacking them on
top of each other. When placing the Amplifier Rack on the ground or platforms, make sure
the area is even and capable to carry the total load! Brake the wheels in every case!
Stacked Amplifier Racks & area protection!
When setting up a system with Amplifier Racks or stacked Amplifier Racks, secure the
entire work area with crowd control barriers. Make sure that the secured area is
sufficiently large in proportion to the height of the stack! Do not stack more than 3
Amplifier Racks on top of each other! Brake the wheels in every case!
! 5
KW-18 Amplifier Rack Manual
Advertisement
Table of Contents
