Table of Contents
Advertisement
Lambda Labs - Professional Acoustics
3.3 Figure 2: KW-18 Amplifier Rack Rear Overview (Delivery State, cables are not depicted)
a)
d)
PART
a)
Perforated Door
Lambda Labs KW-18 Amplifier Rack uses a 6 RU Rack Door on the Rear Rack Rails
to keep the cabling protected while ensuring sufficient cooling for the Amplifiers.
You might open this door when you need to re-patch your signal or power cabling.
Signal Distribution (Rear Side)
b)
The 19" 2 RU Signal Distribution provides 8 pole, 4 pole and 2 pole Speakon
Outputs. Additionally, it provides Dante, AES, Analogue Inputs and Ethernet
Remote control for 2 KW-18 Amplifiers or 3rd party amplifiers with daisy chain
outputs. Cables are not depicted in the illustrations. All cables are labeled.
c)
Power Distribution (Rear Side)
The 19" 2 RU Power Distribution provides a 5 meters (197") 3 x 32A 5 pole cable,
circuit breakers and cables for 2 built in KW-18 Amplifiers or 3rd party amplifiers
and 2 auxiliary products like ethernet switches or DSPs with dedicated circuit
breakers. Cables are not depicted in the illustrations. All cables are labeled.
d)
10 RU Rear Rack Rails (19")
The Lambda Labs KW-18 Amplifier Rack feature shock mount 19" Rack Rails
intended for heavy duty touring usage also on the backside. Lambda Labs
recommends using both rear and front mounting of the KW-18 or 3rd party
amplifiers in every case! When using 3rd party amplifiers, Lambda Labs
recommends individual adapter plates to mount the amplifier to the Rear Rack
Rails as well.
www.lambda-labs.com
DESCRIPTION of 3.3 Figure 2
! 1 3
KW-18 Amplifier Rack Manual
b)
c)
REFERENCE
_
Chapter 5
Chapter 4
_
Advertisement
Table of Contents
