Table of Contents
Advertisement
Lambda Labs - Professional Acoustics
PART
a)
10 RU Front Rack Rails (19")
The Lambda Labs KW-18 Amplifier Rack feature shock mount 19" Rack Rails
intended for heavy duty touring usage. You should always use all 4 screws for the
front mount in a 19" rack. Use standard 6mm rack screws to mount the amplifier.
Lambda Labs recommends using both rear and front mounting of the KW-18 or 3rd
party amplifiers in every case! When using 3rd party amplifiers, Lambda Labs
recommends individual adapter plates to mount the amplifier to the Rear Rack
Rails as well.
KW-18 Amplifier
b)
Usual placement of the devices in the Lambda Labs KW-18 Amplifier Rack. The
KW-18 Amplifiers require 2 rack units each. Its width is 19" standard size to
mount to the Front and Back Rack Rails. For further details, please follow the
instructions given in the KW-18 Manual.
c)
Perforated Plate
To further increase the cooling effect, the KW-18 Amplifier Rack uses a 1RU 19"
perforated plate between the KW-18 units.
Signal Distribution (Front Side)
d)
The 19" 2 RU Signal Distribution provides 8 pole, 4 pole and 2 pole Speakon
Outputs. Additionally, it provides Dante, AES, Analogue Inputs and Ethernet
Remote control for 2 KW-18 or 3rd party amplifiers with daisy chain outputs.
e)
Power Distribution (Front Side)
The 19" 2 RU Power Distribution provides a 5 meters (197") 3 x 32A 5 pole cable,
circuit breakers and cables for 2 built in KW-18 Amplifiers or 3rd party amplifiers
and 2 auxiliary products like ethernet switches or DSPs with dedicated circuit
breakers.
Danger: You should always use all 4 screws for the front mount in a 19" rack! Use standard 6mm rack
screws to mount the amplifier! Lambda Labs recommends using both rear and front mounting of the
KW-18 or 3rd party amplifiers in every case!
Z
DANGER!
Caution: Use always rack-screws equipped with plastic washer to avoid damage of the KW-18 surface!
Z
CAUTION!
Caution: Never operate the amplifiers with closed doors! Both doors need to be open while operating
the amplifiers!
Z
CAUTION!
Attention: To further increase the cooling effect, Lambda Labs uses a 1RU 19" perforated plate
between the KW-18 units. Do not remove this plate and keep a distance between the amplifiers!
Z
ATTENTION!
www.lambda-labs.com
DESCRIPTION of 3.3 Figure 1
! 1 2
KW-18 Amplifier Rack Manual
REFERENCE
_
_
_
Chapter 5
Chapter 4
Advertisement
Table of Contents
