Table of Contents
Advertisement
Lambda Labs - Professional Acoustics
PART
i)
AMP 2 OUT 7 and 8
4 pin Neutrik Speakon output from Amplifier 2 Channel 7 and Channel 8 (Bottom
Amplifier Unit). For detailed Pinout, please refer to Chapter 8.
j)
AMP 2 OUTPUT 8
8 pin Neutrik Speakon output from Amplifier 2 Channel 8 (Bottom Amplifier Unit).
For detailed Pinout, please refer to Chapter 8.
SIGNAL INPUT
k)
Analogue or AES/EBU Signal input for the Amplifier Rack. For detailed Pinout,
please refer to Chapter 8.
SIGNAL OUTPUT
l)
Daisy Chain Analogue or AES/EBU Signal output for using additional Amplifier
Rack(s). For detailed Pinout, please refer to Chapter 8.
m)
ETHERNET INPUT
Ethernet Input Connector (1000MB/S) for remote control of the external and/or
built in DSPs.
n)
ETHERNET OUTPUT
Daisy Chain Ethernet Output Connector (1000MB/S) for connecting additional
Amplifier Rack(s).
DANTE PRIMARY
o)
Primary DANTE Connection to use with external and/or built in DSPs.
p)
DANTE SECONDARY
Secondary DANTE Connection to use with external and/or built in DSPs and for
Daisy Chain Connection with additional Amplifier Rack(s).
5.2. Signal Distribution Detailed Description Rear View
5.2 Figure 1: Signal Distribution Rear View (Delivery State, cables are not depicted)
a)
c)
b)
d)
www.lambda-labs.com
DESCRIPTION of 5.1 Figure 1
g)
e)
f)
h)
i)
j)
! 1 7
KW-18 Amplifier Rack Manual
REFERENCE
Chapter 5.2, 5.3
Chapter 6
Chapter 8
Chapter 5.2, 5.3
Chapter 6
Chapter 8
Chapter 5.2, 5.3
Chapter 6
Chapter 8
Chapter 5.2, 5.3
Chapter 6
Chapter 8
_
_
_
_
Advertisement
Table of Contents
