Table of Contents
Advertisement
Lambda Labs - Professional Acoustics
Danger: You should always use all 4 screws for the front mount in a 19" rack! Use standard 6mm rack
screws to mount the amplifier! Lambda Labs recommends using both rear and front mounting of the
KW-18 or 3rd party amplifiers in every case!
Z
DANGER!
Caution: Use always rack-screws equipped with plastic washer to avoid damage of the KW-18 surface!
Z
CAUTION!
Caution: Never operate the amplifiers with closed doors! Both doors need to be open while operating
the amplifiers!
Z
CAUTION!
4. Power Distribution Detailed Description
4.1. Power Distribution Detailed Description Front View
4.1 Figure 1: Power Distribution Front View (Delivery State)
PART
a)
Auxiliary
6A Type "B" Circuit Breaker for Auxiliary devices (Ethernet Switch, DSP etc.) The
AUX Power outlets are getting power from the L1 Power Line!
b)
AMPLIFIER 1 L1/L2/L3
16A Type „C" Circuit Breakers for the Amplifier 1 (Top Amplifier Unit)
c)
AMPLIFIER 2 L1/L2/L3
16A Type „C" Circuit Breakers for the Amplifier 2 (Bottom Amplifier Unit)
www.lambda-labs.com
a)
DESCRIPTION of 4.1 Figure 1
b)
! 1 4
KW-18 Amplifier Rack Manual
c)
REFERENCE
Chapter 4.2, 4.3
Chapter 6
Chapter 4.2, 4.3
Chapter 6
Chapter 4.2, 4.3
Chapter 6
Advertisement
Table of Contents
