Related Manuals for Aiwa NSX-TRV77
Summary of Contents for Aiwa NSX-TRV77
- Page 1 CD Stereo System OPERATING INSTRUCTIONS (English) NSX-TRV77 8C-NHT-901-01 020801AKH-H-BF...
-
Page 2: Precautions
PRECAUTIONS 7 Condensation — Moisture may form on the CD pickup WARNING Read these Operating Instructions carefully and lens when: completely before operating the unit. All precautions on TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, - The unit is moved from a cold spot to a warm spot this booklet and on the unit should be strictly followed. -
Page 3: Table Of Contents
•The remote control may not operate if it is used under intense sunlight, etc., or if its line of sight is obstructed. System and accessories NSX-TRV77 IMPORTANT: Check your AC voltage!! CX-NTRV77 CD stereo cassette receiver The unit's AC voltage can be switched between 220V and SX-NTR77 Front speakers 230V-240V. -
Page 4: Preparations
PREPARATIONS 2 Connect the supplied antennas. 3 Connect a TV to watch graphics. Connection Strip off the insulation of the FM antenna with twisting Connect the VIDEO OUT jack of this unit to the video Plug in the AC power cord to the AC power outlet after all the cord. -
Page 5: Parts And Controls
PARTS AND CONTROLS •This unit does not support color systems other than Main unit: rear Dynamic Integrated Neo Amplifier PAL and NTSC, such as NTSC 4.43 or SECAM. •If there is a color or picture trouble in the AUTO mode, is a brand-new amplifier system where clear mid-to-high select NTSC or PAL. - Page 6 6 TREBLE/MIDDLE Main unit: front TITLE Displays the title of the album and track on an MP3- Adjusts high or middle frequency sound. TRIPLE DRIVE 4 SYNC DUB Adjusts low frequency sound. Starts dubbing a whole tape. HEAVY, VOCAL, SALSA, wREC/REC MUTE TECHNO, HIP HOP, MANUAL Starts recording.
- Page 7 Remote control RANDOM/REPEAT SLOW Enters random or repeat disc playback mode. Plays back a VCD slowly while held down. TIMER ZOOM Enters timer setting mode. Enlarges VCD picture during pause. 5 ON SCREEN SLEEP Enters sleep-timer setting mode. Displays disc information such as the elapsed playback time on the TV screen.
-
Page 8: Adjustments Before Operations
ADJUSTMENTS BEFORE OPERATIONS DEMO If the clock has not been set, a DEMO appears on the display when the unit is turned off. To deactivate and activate the DEMO Press d when the unit is turned off. Spectrum analyzer display You can change the spectrum analyzer display. - Page 9 ECO mode Dimmer Setting the clock Reduces power consumption with the following operations, Adjusts the brightness of the display. 1 Press SHIFT+CLOCK on the remote control. etc. On the unit, press MODE repeatedly to display 1 Press MODE repeatedly to display "DIMMER" "CLOCK", and then press ENTER within 4 seconds.
-
Page 10: Cd Operations
CD OPERATIONS To replace disc(s) during playback without interruption While one disc is being played back, press DISC CHANGE so that the compartment opens, replace disc(s) with other one(s), and press DISC CHANGE to close the compartment. Random/Repeat playback Random playback plays all the tracks on one desired disc or all the discs in random order. - Page 11 To check the program Programed playback Notes on CDs Press f or g repeatedly during stop. The track •Do not place more than one disc on one tray. Plays back up to 30 selected tracks in programed order. number and program number are displayed in succession. •Do not tilt the unit with discs loaded.
-
Page 12: Video Cd Operations
2 Press CD and load disc(s). Basic operations for a PBC disc "aiwa" is displayed on the TV screen. - To return to the previous scene, press fPREVIOUS - PBC disc: "PBC" and total playback time is displayed. - Page 13 To cancel the PBC (Play Back Control) function for 2 Press a numbered button (0-9, +10) on the Marking a PBC disc remote control to select the desired track. Marks a desired point in the VCD. (Only for a non-PBC disc or Press PBC on the remote control.
-
Page 14: Mp3-Cd Operations
MP3-CD OPERATIONS On TV screen display - An album title list of the disc is displayed with the arrow pointing to the currently selected album after loading the disc or when skipping to a previous or a succeeding album. - A track title list of the currently selected album is displayed with the arrow pointing to the currently selected track when skipping to a previous or a succeeding track, or during playback. - Page 15 Terminology Notes on creating MP3 discs Descriptions of MP3 •ISO 9660 •When converting audio data to MP3 • An MP3 file stores audio data compressed using MPEG1/2, ISO stands for the "International Organization for The unit supports MP3 files with a sampling frequency of the audio layer-3 file-coding scheme.
-
Page 16: Radio Operations
RADIO OPERATIONS Preset tuning Preset your favorite stations and tune them in directly. Presetting stations 1 Press TUNER/BAND to select the band. 2 Press f or g to tune in to the desired station. 3 Press aSET to store the station. The preset number, beginning from "1", appears on the display. - Page 17 Tuning in to preset stations Adjustments On the unit Antennas 1 Press TUNER/BAND to select the band. Keep antennas away from metallic objects, electrical equipment and cords. 2 Press dPRESET repeatedly or turn MULTI FM antenna: Extend fully and position for the best reception. JOG.
-
Page 18: Tape Operations
TAPE OPERATIONS To select a deck (DECK 1 or DECK 2) Press TAPE/DECK 1/2 (FUNCTION on the remote control) in stop mode when tapes are loaded in both decks. The deck number ("T1" or "T2") is displayed. To select a reverse mode (DECK 2 only) 1 Press MODE repeatedly to display "REVMODE", and then press ENTER within 4 seconds. - Page 19 To pause recording (only for TUNER or VIDEO/AUX 3 Press SYNC DUB. Basic recording source) The tapes are rewound to the beginning of the front side Use only type I (normal) tapes. DECK 2 is the recording deck. Press a. Press again to resume. and recording starts.
- Page 20 6 Press wREC/REC MUTE to start recording on 5 Press DISC DIRECT PLAY 1-3 to select a disc. To change the program of each side side A. Then, press the numbered buttons on the remote Press SHIFT+CD EDIT/CHECK on the remote control to control to select the first track to be recorded The tape is rewound to the beginning of side A and select side A or B, and press s to clear the program for the...
-
Page 21: Sound Adjustments
SOUND ADJUSTMENTS Setting a curve manually The equalization curve can be customized to suit your preference. 1 Adjust the three frequency ranges. - To adjust the low frequencies (BAS), turn TRIPLE DRIVE. Adjust from MIN (-2) to MAX (+5). - To adjust the middle frequencies (MID), hold down ENTER and turn TREBLE/MIDDLE. -
Page 22: Karaoke
MIN and remove it from the MIC jack. Pull it out by the source is heard from both speakers and the right (or left) plug, not the cord. channel of the source is muted while there is audio input •Use of an AIWA unidirectional microphone is recommended through microphones. to prevent howling. - Page 23 To add a track to the program during playback Echo Karaoke program Repeat step 3. Produces echo effects. (Only during disc playback) In Karaoke programed playback, tracks can be added even during disc playback, and each programed track is cleared To check the program Press SHIFT+ECHO on the remote control and turn when it finishes playing.
-
Page 24: Timer Operations
TIMER OPERATIONS 4 Press f or g to set the timer-activated duration, then press aSET or ENTER. With each press, the timer-activated duration changes in 5-minute steps between 5 to 240 minutes. 5 Press f or g to adjust the volume level, then press aSET or ENTER. - Page 25 To display the timer setting Timer recording Press SHIFT+TIMER on the remote control. Timer recording is available only for TUNER and VIDEO/AUX The timer-on time, the source and the timer-activated (with an external timer) sources. duration are displayed for 6 seconds. 1 Press SHIFT+TIMER on the remote control Tip: repeatedly to display "...
-
Page 26: Reference
REFERENCE The disc player works poorly. Care and maintenance Troubleshooting •Is the disc correctly loaded? Occasional care and maintenance of the unit and the software If your unit fails to perform properly, check the following guide •Is the disc dirty? are needed to optimize the performance of your unit. - Page 27 DISC PLAYER Specifications Laser Semiconductor laser (λ = 780 nm) MAIN UNIT CX-NTRV77 D/A converter 1 bit dual TUNER Signal-to-noise ratio 90 dB (1 kHz, 0 dB) FM tuning range 87.5 MHz to 108 MHz Harmonic distortion 0.05 % (1 kHz, 0 dB) Video signal NTSC/PAL color system (selectable) FM usable sensitivity (IHF) 13.2 dBf...
- Page 28 NSX-TRV77...