Factory Mode - DAEWOO ELECTRONICS DSL-15D1T Service Manual

Factory Mode

Remark: These modes are used for factory only.
Digit 1 Key (Heat-run & Test pattern mode)
● Pressing this key, the Test pattern will be displayed as follow;
Normal → Red pattern→ Green pattern→ Blue pattern → White pattern →Normal
● Note that you can exit from this mode with this key only.
Digit 2 key (Picture Control Checking)
● Pressing this key, the Picture control value will be changed in sequence automatically.
Brightness (min max center) →Contrast (min max center) →Colour (min max center)
→Sharpness (min max center) →Tint (left right center) →Normal
Digit 3 Key (Sound Control Checking)
● Pressing this key, the Sound control value will be changed in sequence automatically.
Treble (min max center) → Bass (min max center) →Balance (left right center) →
Volume (min max center)
Digit 6 key (Outgoing)
● Pressing this key, OSD "Outgoing" will be displayed during initializing the EEPROM data,
and then the set will be turned off automatically.
No. Item
1 CH data (PR0-99)
3 SKIP (PR2-99)
5 Colour
7 Bri /Cont/Col/Sharp
9 Sound Spatial
11 Volume
13 OSD
15 Zoom
● When you turn on the TV set for the first time, the Language menu for the on-screen display
appears.
Data
.
CH52 2
Yes 4
- - - 6
Normal 8
No 10
30/100 12
Opaque 14
4:3 (15")
16:9 (17"W)
No Item
Station Name
System
Fine tune
Treble/Bass/Balance
Sound Forced Mono
Child lock
Language
Data
- - - - -
- -
center
Center
Off
No
English
18