Service Mode; 4-1.Eeprom Initial Data - DAEWOO ELECTRONICS DLT-42U1GMB Service Manual

4. SERVICE MODE

Using the Service Remote controller, you can enter service mode directly.
SERVICE REMOCON : R-34SVC(S/N:48B3034SVC)

4-1.EEPROM initial DATA

Name
Key
S1 Heat Run Mode
S2
S3 Volume Test
S4
EDID write
S5 PANEL TEST
S6 PICTURE TEST
S7
White balance &
S8
EEPROM Erase
All manuals and user guides at all-guides.com
Details
Gumi channel map write
Volume 0->32->63->L->R
1.Connect jumper(I2C)
2.Press "S4" key and then, TV set display "EDID WRITE
Operating Method
3.If EDID writing is fail, TV set display "EDID Write Error"
4.After EDID write, remove jumper
PATTERN: BLACK -> WHITE -> RED -> GREEN -> BLUE
PATTERN: BRIGHT MIN -> CEN-> MAX ->
DEMPOL CHANNEL MAP WRITE
1.Press the "S8" key.
2.Press the "OK" key of user remocon. And then TV set
EEPROM Erase
operating method
3.When you turn off/on AC POWER. EEPROM data will
CUT OFF R
CUT OFF G
CUT OFF B
DRIVE R
DRIVE G
DRIVE B
Auto Y Clamp
Auto Y Gain
Function
Default
OK" upper left of screen.
upper left of screen.
CONTRAST MIN -> CEN -> MAX->
COLOR MIN -> CEN -> MAX
display " EEPROM CLEARED" upper left of screen.
be cleared.
Default
0
0
0
300
290
290
Don't use
Don't use
-10-
Adjustment
Adjustment
fix
fix
fix
fix
fix
fix
fix
fix