Table of Contents
Advertisement
ALIGNMENT INSTRUCTION
Service Mode
● If you replace the EEPROM by a new (blank) one, the EEPROM data will be initialized
as follows;
Item
BLU brightness
Teletext
SCART
LCD
● You can change the values in the Service mode, if necessary.
● To switch the TV set into Service mode, press the
Digit 1 key → Mute key → Status key → Mute key
in sequence within 5 seconds.
In the Service mode, the OSD "Service" will be displayed.
● To exit Service mode, press and hold (for 1.5 second) the Mute key.
Digit 4 KEY (Picture adjustment)
1. Press the Digit 4 key to call up the Picture adjustment menu.
2. Set the BLU(back Light Unit) brightness to "0".
Digit 5 key (Option setting)
1. Press the Digit 5 key to call up the Option setting menu.
2. Set the Options as follow;
Default values
0
W-Euro
SCART
17" 16:9
16
Advertisement
Table of Contents
