Pip Mode - DAEWOO ELECTRONICS DLM-32C5 Instruction Manual

All manuals and user guides at all-guides.com
- The user can enjoy two screens by using PiP function.
1. Adjustment of PiP Mode
• Move to Mode in the PiP.
• ress the "◀ ◀ /▶ ▶ " buttons to select, PiP mode changes as follow:
POP => Small PiP => Large PiP => Off
2. Adjustment of Sound Output
• Move to Sound Output in the PiP.
• Press the "◀ ◀ /▶ ▶ " buttons to select, Sound Output changes
as follow: : Main => Sub => Main
Note.
• On the side by side, you can select the sound output directly by
activating outline using "◀ ◀ /▶ ▶ " buttons on the remote controller.
3. Pressing the "P.MODE" button on the remote controller.
• The PiP Mode changes as follows:
PiP off => Side by Side => PiP => PiP off
• Side by Side : This mode will display two screen left(Main) and
right(Sub).
• PiP : This mode will dilplay two screen, Main is full screen and
Sub is fixed on the right-bottom side.
Note.
• PiP is just consist of one Analog(RF/DVB-T, AV, COMP and PC mode)
and one Digital(HDMI mode). It means, if Main is on Analog then
Sub must be on Digital.
4. Pressing the "P.SIZE" button on the remote controller.
• On the Side by Side, the screen changes as full side by side.
• On the PiP, Sub screen size is changed : large => small => large.
Main Sub
Side by side
Main
Sub
37

PIP Mode

Picture
Screen
Sound
Install
Function
Move
Picture
Screen
Sound
Install
Function
Move
Sub
Main
PIP
Aspect Full Screen
Access
PC
Access
PiP
Select MENU Exit
PiP
Mode Small PiP
Sound Output Main
Adjust Exit
MENU
Sub
Main