ODYN LeetDesk 1337-1 Assembly & Instruction Manual page 18

3.2 General usage
Move your LeetDesk up and down with the + and - buttons
respectively. Simply press and hold the corresponding buttons until
the desk has reached your preferred height. The current height will
be displayed on the handset.
You can save your preferred height settings with the memory
setting. In order to save your current desk height to one of the three
memory settings, simply press the M button and then one of the 1, 2
or 3 buttons.
Your LeetDesk will always move back to the position you saved after
pressing the 1, 2 or 3 button all by itself.
3.3 Anti-collision detection
All LeetDesk models have a anti-collision system. If during
movement the LeetDesk is bumped or moved in any way, the
table will cease movement and move to the opposite direction
it was moving for about 1-2 cm.
This is to prevent inadvertently damaging people or objects
through movement of the desk.
18