ODYN LeetDesk 1337-1 Assembly & Instruction Manual page 17

3. How to use your LeetDesk
3.1 First Use
Before first use, please make sure once again, that there are no
obstacles in the way of the LeetDesk when moving it up or down.
Also make sure, that your desk is not directly touching the wall, as
otherwise it could potentially damage your walls during movement.
Make sure all your electronic devices that you plan to use at your
table have cables that are long enough even when the table is in a
high position.
You might have to do a Factory Reset before first using your
LeetDesk.
In order to do that, press and hold the - Button until the table has
reached it's lowest position. Let go of the - Button and press and
hold it again until the handset will display „RST". Let go of the -
Button. Once again press and hold the - Button until the table
moves down a little lower, rises a little bit and then stops. Let go of
the - Button. Now your LeetDesk is ready for use!
Most issues with your LeetDesk can be solved by doing this
factory reset.
17