Juniper T320 Replacing Manual page 4

4
Installing a T320 Rear Fan Tray
Figure 3: Removing a Rear T320 Fan Tray
Installing a T320 Rear Fan Tray
To install a replacement rear fan tray (see Figure 4):
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and
1.
connect the strap to one of the ESD points on the chassis. For more information
about ESD, see Preventing Electrostatic Discharge Damage to an M Series, MX
Series, or T Series Router.
Grasp the fan tray by its handles and insert it straight into the chassis.
2.
Tighten the captive screws on the fan tray faceplate to secure it in the chassis,
3.
using a Phillips (+) screwdriver, number 2.