Behaviour on DMX control
failure
In this menu, you can specify the behaviour of the device when the DMX signal is interrupted.
Press [MENU] repeatedly until the display shows 'SET' . Confirm the selection with [ENTER]. Use
[UP] or [DOWN] to select the 'DFAL' option. Confirm the selection with [ENTER]. Use [UP] or
[DOWN] to select the device behaviour on DMX signal failure. The following table shows the
available options:
Menu level 2
'DFAL'
Confirm the selection with [ENTER].
Menu level 3
'Hold'
'bLAK'
Operating
Function
If the DMX control fails, the
last setting is retained.
If the DMX control fails, the
device is blacked out.
2bright Blind 3K
33
blinder