Operating
Display reversion
Display illumination
2bright Blind 3K
32
blinder
In this menu, you can specify whether the display should be shown normally or rotated by
180°.
Press [MENU] repeatedly until the display shows 'SET' . Confirm the selection with [ENTER]. Use
[UP] or [DOWN] to select the 'DREV' option. Confirm the selection with [ENTER]. Use [UP] or
[DOWN] to select the 'ON' option if you want the display to be rotated by 180°.
or
Use [UP] or [DOWN] to select the 'OFF' option if you want the display to be shown normally.
Confirm the selection with [ENTER].
In this menu, you can set whether the display is automatically switched off or remains perma‐
nently on during operation.
Press [MENU] repeatedly until the display shows 'SET' . Confirm the selection with [ENTER]. Use
[UP] or [DOWN] to select the 'DbKL' option. Confirm the selection with [ENTER]. Use [UP] or
[DOWN] to select the 'ON' option if you want the display to remain on permanently.
or
Use [UP] or [DOWN] to select the 'OFF' option if you want the display to be automatically
switched off after 30 seconds without keypress.
Confirm the selection with [ENTER].