Bock Water heaters Indirect Coil Tank Water Heater Specifications

Side
indirect water-to-water heat transfer by circulating boiler-fed hot water through a
coil inside the water tank. Ideal for applications that use boilers for space heating
Whatever your hot water needs, there's a Bock, just right for you.
Built to last -
Inner tank is hand-crafted from heavy
gauge steel. Longer life equals a
higher "Return on Investment".
Outer jacket made from steel
and powder coated for a lasting,
durable finish.
- durable and exclusive
porcelain enamel glass lines all tanks
and coils. Highly resistant to aggressive
water. Not susceptible to damage due
to the presence of chloride in the water.
Automatic controls - immersion
aquastat used in all models.
Factory installed brass drain valve -
accessible, tamper-proof.
Sediment reduction inlet - available on
the 80SK and 119SK. Reduces sediment
buildup on the tank bottom, increasing
operating efficiencies and tank life.
Bock's SideKick ™ Indirect Coil Tank water heaters, offer a
cost-effective water heating alternative. These units use
TM
7 year limited warranty on residential installations.
3 year limited warranty on commercial installations.
Quality Crafted Hot Water Solutions!
Factory installed relief valve - CSA listed.
1-1/2" coil diameter- larger diameter,
results in higher recovery and less
pressure drop through the coil, smooth
surface on coil resists lime build up.
2" Non-CFC foam insulation -
decreases standby heat loss.
Two magnesium anode rods - Inhibit
corrosion and maximize tank life.
Electrolysis attacks the anode rods,
not the tank.
Factory installed dielectric nipples
on boiler connections - provides greater
insulating protection.