F E A T U R E S - Vestax PCV-175 Owner's Manual

15. Damage Requiring Service-Unplug this product
from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled or objects have fallen
into the product.
c. If the product has been exposed to rain or
water.
d. If the product dose not operate normally by
following the operating instructions. Adjust
only those controls that are coverd by the
operating instructions as an improper
adjustment of other, controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
e. If the product has been dropped or cabinet has
been damaged.
f. When the product exhibits a distinct change in
performance this indicates need for service.

F E A T U R E S

60mm long faders are provided for 3 program
●
c h a n n e l s . M o r e s e n s i t ive c o n t r o l c a n b e
achieved for Techno/Trance mixing.
Effect send switch is equipped on each input
●
channel for effect parformance. The effect send
and return level controls are provided in the
master section.
P.F.L. (pre fader listen) switch is provided for pre
●
fader monitoring.
The input levels are monitored by over load
●
indicator.
Four mic input levels are provided. The main mic
●
can be assigned to program channel 2 for full
control. The other tree mics are mixed with
individual level control, 2 band EQ, effect send
and P.F.L.
16. Replacement Parts-When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer
or have the same characteristics as the original
parts. Unauthorized substitutions may result in
fire, electric shock or other hazards.
17. Safety Check-Upon completion of any service or
repairs to product, ask the service technician to
perform safety checks to determine that the
product is in proper operating condition.
18. Carts and Stands-The appliance should be used
only with a cart stand that is recommended by
manufacturer.
19. An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
Ten segment LED level meter is provided for
●
careful level check.
A powerful 3 band EQ with +6/-24dB range is
●
provided along with the instant out switch on
each band. More sensitve and drastic control can
be achieved for Techno/Trans mixing.
The new PCV-175 features removable flat panel
●
that covers all screws etc., that will impede fast
mixing. The panel is removed for crossfader and
inputfaders replacement.
New suprior grade crossfader (CF-PCV) fittde to
●
PCV-175 enebling super smooth operation
torether with long life.
3