Table of Contents
Advertisement
Operating the appliance
en
1Operating the appliance
You have already learnt about the controls and how
p l i a n c e
O p e r a t i n g t h e a p
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
:
Warning – Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
:
Warning – Risk of scalding!
The water in the evaporator dish is still hot even after
the appliance has been switched off. Do not empty the
evaporator dish immediately after switching off the
appliance. Allow the appliance to cool down before
cleaning it.
Filling the water tank
When you open the appliance door, you will see the
water tank on the right-hand side. Before starting the
operation, fill the water tank with water.
Ensure that you have correctly set the water hardness
range. ~ "Basic settings" on page 18
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(> 40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
uncarbonated mineral water.
Fill the water tank before each use:
Open the appliance door.
1.
Remove the water tank from the water tank recess
2.
(picture
).
!
Fill the water tank with cold water up to the "max."
3.
mark. (Picture
).
"
Close the tank cover
4.
until you feel it engage.
12
Insert the filled water tank (picture
5.
Check whether the water tank is pushed in flush with
6.
the water tank recess (picture
Close the appliance
7.
door.
The water tank has been filled. You can now start the
operation.
Refilling the water tank
If the water tank is empty, the prompt to fill the water
tank appears on the display. The operation is stopped.
Carefully open the appliance door.
1.
Remove the water tank and fill it.
2.
Slide the water tank back in and close the appliance
3.
door.
Start the operation.
4.
The operation continues.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching the appliance on
Use the k button to switch the appliance on.
The k symbol above the button is illuminated in blue.
The Siemens logo appears in the display, and then a
heating mode and a temperature.
You can specify which heating mode should
Note:
appear after the appliance is switched on in the basic
settings. ~ "Basic settings" on page 18
Switching off the appliance
Use the k button to switch the appliance off.
The lighting above the button goes out.
A set function is cancelled.
The time appears on the display.
You can set whether or not the time should be
Note:
displayed when the appliance is switched off in the
basic settings. ~ "Basic settings" on page 18
).
#
).
$
Advertisement
Table of Contents
