Table of Contents
Advertisement
A
O
DVANCED
PERATION
F
-M
S
OLLOW
E
CAN
"Follow-Me" Scan feature checks a User-assigned Priority Channel regularly as you
scan the other channels. Thus, if only Channels 1, 3, and 5 (of the 8 available chan-
nels) are designated for "Scanning," the user may nonetheless assign Channel 2 as
the "User-assigned" Priority Channel via the "Follow-Me" feature.
To activate "Follow-Me" scanning, first select the channel you want to designate as
the "User-Assigned Priority Channel" and press (or press and hold) the assigned
programmable key. Then press (or press and hold) the Channel Up/Down key to
recall to the "Scanning Start" channel which has been programmed by your dealer to
activate the scanner. When the scanner stops on an "Active" channel, the User-as-
signed Priority Channel will automatically be checked every few seconds; if activity
is found on the User-assigned Priority Channel, the radio will switch between it and
the Dealer-Assigned Priority Channel, if any.
( DW )
F
-M
D
W
OLLOW
E
UAL
ATCH
To set up a "Dual Watch" frequency pair using the "Follow-Me" feature, select a
channel using the Channel Up/Down key. Now press (or press and hold) the assigned
programmable key; pressing (or press and holding) the assigned programmable key
locks the current channel as the User-assigned Priority Channel. Now press (or press
and hold) the Channel Up/Down key to select another channel (not the "Scanning
Start" channel). Your radio will now switch back-and-forth between the currently-
selected channel and the User-assigned Priority Channel.
During "Follow-Me" scanning (after you have pressed the key), you can set up the
"Dual Watch" feature by pressing (or press and holding) the Channel Up/Down key
to another channel. The radio will then scan back and forth between the original
User-assigned Priority Channel and the newly-selected channel.
The Priority Channel you have assigned (before pressing the key) will be retained in
memory until you change it.
( LOW )
L
P
OW
OWER
Press (or press and hold) the assigned programmable key to set the radio's transmit-
ter to the "Low Power" mode. Press (or press and hold) the key again to return to
"High Power" operation when in difficult terrain.
10
VX-2100E S
O
M
ERIES
PERATING
ANUAL
Advertisement
Table of Contents
