Lock Feature; Keyboard Beeper - Yaesu FT-2800M Operatiing Manual

A
DVANCED
To order to prevent accidental frequency change or inadvertent transmission, various as-
pects of the FT-2800M's keys and knob may be locked out. The possible lockout combina-
tions are:
KEY: Just the front panel keys are locked out
DIAL: Just the front panel DIAL knob is locked out
K+D: Both the keys and DIAL knob are locked out
PTT: The PTT switch is locked (TX not possible)
K+P: Both keys and PTT switch are locked out
D+P: Both DIAL knob and PTT switch are locked out
ALL: All of the above are locked out
OFF: The Lock feature is disabled
To lock out some or all of the keys, use the "Set" (Menu) mode, described in detail begin-
ning on page 51:
1. Press and hold in the [ MHz ( SET )] key for one second, then rotate the DIAL knob to
select "14 LOCK."
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to set the display to one of the
selections shown above.
3. Press and hold in the [ MHz ( SET )] key for one second to save your new setting and exit
to normal operation.
When the Lock feature is activated, the "
To disable the Lock feature, repeat the above process, selecting "OFF" in step 2 above.
A key/button beeper provides useful audible feedback whenever a key/button is pressed. If
you want to turn the beeper off (or back on again):
1. Press and hold in the [ MHz ( SET )] key for one second, then rotate the DIAL knob to
select "03 BEEP."
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob to set the display to "OFF."
3. Press and hold in the [ MHz ( SET )] key for one second to save your new setting and exit
to normal operation.
18
O
PERATION
LOCK F
K
EYPAD
EATURE
" icon will appear on the LCD.
B
EEPER
FT-2800M O M
PERATING ANUAL