Rear Panel - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Figure 1-2 USG6310 front panel
Name
USB 2.0 port
Interface status
indicators 0 to 7
(green)
System status indicators
PWR indicator
(green)
SYS indicator
(green)
ALM indicator
(red)
USB indicator
(green)

1.1.1.3 Rear Panel

The rear panel of the USG6310 provides fixed ports, a protective ground terminal, RST
button, and power socket.
Issue 03 (2015-01-26)
Description
USB ports allow you to insert USB devices for system software
upgrades. For details on upgrades through USB devices, refer to the
Upgrade Guide delivered with the device.
 Steady on: The link is connected.
 Blink eight times every second (8 Hz): Data is being sent or
received.
 Off: The link is disconnected.
 Steady on: The power module works properly.
 Off: The power module is faulty or the power cable is disconnected.
 Steady on: The system is powering on or restarting.
 Blink every two seconds (0.5 Hz): The system is running normally.
 Blink twice every second (2 Hz): The system is starting.
 Blink eight times every second (8 Hz): The system software or
configuration file is being upgraded.
 Off: The system is faulty.
 Steady on: The system is faulty. For example, the power-on self test
(POST), power voltage, or temperature is abnormal.
 Off: The system is running normally.
 Steady on: The USB 2.0 port is connected.
 Off: The USB 2.0 port is disconnected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
3