Front Panel - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Unified Security Gateway
Hardware Guide



The USG6670 by default has two 2XG8GE interface cards and one 8GEF interface card to
provide the following service ports:



The five expansion slots on the USG6670 support the expansion cards listed in
Table 1-46 Supported expansion cards
Expansion Card
8GE WSIC Interface Card
2XG8GE WSIC Interface Card
8GEF WSIC Interface Card
4GE-BYPASS WSIC Card

1.3.3.2 Front Panel

By default, the USG6670 front panel has two 2XG8GE interface cards, one 8GEF interface
card, a protective ground terminal, an ESD jack, and some expansion slots.
The front panel of the USG6670 is pictured in
Issue 03 (2015-01-26)
1 console port (RJ45)
1 console port (mini USB)
2 USB 2.0 ports
8 GE optical ports
16 10/100/1000M autosensing Ethernet electrical ports
4 10GE optical ports
The slots are divided into two types: one for Wide Service Interface Cards (WSIC) and the other for
Extended Service Interface Cards (XSIC). An XSIC is twice as high as a WSIC. An XSIC slot can also
hold a WSIC card, but only in the lower part, and in this case, no other card can be installed in the upper
part.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Provides eight gigabit RJ45 Ethernet ports.
Provides eight gigabit RJ45 ports and two
10-gigabit SFP+ ports.
Provides eight gigabit SFP ports.
Provides two electrical bypass links.
Figure 1-52.
1 Hardware Overview
Table 1-46.
108