Attach The Burner Chamber - Vermont Castings Signature VC3624GS Assembly And Owner's Manual

Locate these parts:
Venturi
Tube
5. Open the cabinet door to access the
burner chamber mounting holes.
6. From the inside of the cabinet, e
that the mounting holes and mounting
tabs are properly aligned;
bolts into the mounting holes and
securely tighten.
Assembly Step 4
Hardware:
1/4-20 x 1/2"
Bolts
3 Required
Burner
Chamber
Burner
Valve
N T
F R O
nsure
insert the 3
7. Locate the lose end of the ignitor wire routed
from inside the burner chamber. Connect the
wire to the unused prong on the back of the
ignitor module.
8. Turn the smoker assembly upright.
A1
HARDWARE BAG
1. Leave the cabinet upside down.
2. Position the burner chamber upside down
over the bottom of the cabinet as shown.
3. Set the burner chamber onto the bottom
of the cabinet, just inside the cut out
portion of the bottom panel.
4. Maneuver the burner chamber so that the
burner valve seats into the end of the
venturi tube.
IMPORTANT! The burner valve must be properly
seated into the venturi tube for safe operation.
7
Tools needed:
Phillips Head
Screwdriver