Attach The Control Panel - Vermont Castings Signature VC3624GS Assembly And Owner's Manual

Locate these parts:
Hardware:
(2 remaining from previous step)
1. Leave the cabinet
upside down.
2. From the front side, position
the control panel upside down
between the front legs as shown.
3. Set the control panel between the
front legs and line up the mounting
holes. Be sure the mounting tabs
on the back side of the control
panel capture the legs as shown.
4. Insert the 2 remaining bolts and
tighten them securely.
Assembly Step 3
1/4-20 x 5/8" Bolts
FRONT
Control
Panel
HARDWARE BAG
Mounting
Tab
6
Tools needed:
A
Phillips Head
Screwdriver