Assemble The Door Handle - Vermont Castings Signature VC3624GS Assembly And Owner's Manual

Locate these parts:
Door Handle Kit
Handle Spring,
Handle Washer,
Mounting Plate
Nameplate with
Heat Indicator
Assembly Step 6
1. Assemble the door handle components as
2. Place the mounting plate onto the backside
3. Place the name plate onto the front of the
Door
D
HARDWARE BAG
1/4-20 x 3/8"
Bolts and
1/4-20 Lock
Washers (2 ea)
E
HARDWARE BAG
Push Nuts
2 required
shown. With the handle washer and spring
mounted to the door handle, insert the door
handle into the front of the door as shown.
of the door panel, capturing the door handle.
Thread the bolts and washers into the back
side of the door and tighten them securely.
door panel as shown below. From the back
side of the door, place push nuts onto the
mounting prongs of the name plate.
9
Tools needed:
Phillips Head
Screwdriver
Inside of Door