Advertisement
Tool Description
Screw driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Unscrew the screws on Holder 1, and then remove Holder 1.
2. Unscrew all screws 2 and 5, and then remove panel 3 and the mounting angle 4.
3. Remove part 5 from the chassis.
4. Remove top cover 7, and then remove plastic panel 6 from the chassis.
5. Remove all of the inner cables.
6. Unscrew the screws on cover 9, and then remove cover 9 from the chassis.
7. Unscrew all screws of battery 10, and then remove battery 10 from the chassis.
8. Unscrew all s, and then remove panel 10 from base 8.
9. Unscrew all screws on fan 11, and then remove fan 11 from the chassis.
10. Unscrew all screws on part 12, and then remove part 12 from the chassis.
11. Unscrew all screws of PCB 13, and then remove PCB 13 from the chassis.
12. Unscrew all screws on fan rack 14, and then remove fan rack 14 from the chassis.
13. Unscrew all screws on support 15, and then remove support 15 from the chassis.
14. Unscrew all screws on PCB 16, and then remove PCB 16 from the chassis.
15. Remove all of the labels from the chassis.
16. Unscrew all screws 11-2, and then remove part 11-3 from part 11-1.
17. Unscrew all screws on cover 14-5, and then remove cover 14-5 from fan rack 14.
18. Unscrew the screw 14-2, and then remove fan 14-4 from fan rack 14-3.
19. Unscrew the screws on PCB 14-6, and then remove PCB 14-6 from fan rack 14.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Figure 1 Remove holder 1
EL-MF877-00
Template Revision B
PSG instructions for this template are available at
Figure 2 Treatments to the product(I)
EL-MF877-01
Tool Size (if
applicable)
2#
Page 2
Advertisement
