Advertisement
MOUNT TIRES
Pull up the bead up of the rim. Pull down the
mounting head closed to rim.
Turn the table until the bead press down closed
to rim flange
Using a bead roller and mounting block press
down the tire flap under the rim flange.
10 TROUBLE SHOOTING AND MAINTENANCE
Phenomena
Analysis
Solution
Switch level is not flexible
1) Disconnected with compressed air
2) Air hose is folded or broken
3) Valve is broken
1) Connect with the compressor according to the manual
2) Inspect the air hose， replace the broken hose and joint
3) Please contact with the department of after sale
Turn the table until the tire flap is under the rim
flange
Finally, pull out the mounting head and DAS
ARM. Fill up the air into tire, then remove the tire
from tire changer.
Advertisement
