Other Useful Information (Cont.)
Drain pump maintenance
We recommend that you clean the drain pump filter regularly (at least once a month) to
avoid blockages created by bobby pins, coins and excess lint.
Proceed as follows:
1.
Disconnect the washer from the power source.
2.
If necessary, wait until the water has cooled down.
3.
Place a container underneath the pump opening to collect any spillage (see
below, left).
4.
Turn the filter cap anticlockwise to take it out gently (see below, right). Always
keep a rag nearby to dry up water spillage when removing the pump filter.
5.
To remove any objects from the filter, wash it thoroughly in a basin or under
running water (see below, left).
6.
Put the cap back and place the filter back in its seat (see below, right).
Filter
NOTE: The drain pump is located at the rear of the machine as illustrated on page 9.
24
(AU) 1300 886 649 (NZ) 0800 836 761 |
After Sales Support
info@tempo.org