Advertisement
Installation (Cont.)
CAUTION!
When tightening the clamping nut, take care not to damage the water
inlet valve joint. Apply force evenly and do not twist the water inlet valve.
CAUTION!
Use only the new (supplied) hoses with your new appliance. Do not
use a hose from an existing machine, or one that has been used previously.
CAUTION!
In the event that the hoses are too short for your set-up, please seek
advice from your local washing machine store to purchase a longer hose.
Positioning the washing machine
• The washing machine is equipped with two rollers at the back that you can use to
move the machine to its desired location. Tilt the washing machine by about 30
degrees and push forward, or pull backward, while holding the machine securely
on both sides with your hands, as illustrated below.
• Move the washing machine to its desired location and install it on a stable and level
surface, in a dry location, out of sunlight. (NOTE: Moving the machine using the
rollers on an uneven surface can damage the rollers.)
CAUTION!
Take care of your back. Do not tilt the washing machine too much,
which could cause injury.
(AU) 1300 886 649 (NZ) 0800 836 761 |
After Sales Support
info@tempo.org
11
Hide quick links:
Advertisement
