Table of Contents
Advertisement
NEW CONSTRUCTION INSTALLATION INSTRUCTIONS (continued)
5. Secure the suspension bracket (C) to fan housing using
screw (CC) (included). Secure suspension brackets (D, E)
with screws (BB) (included).
6. Remove junction box cover as shown in illustration number 6.
Using quick connect ports, connect house wires to the switch
and fan. Please refer to the wiring diagram on page 5 to ensure
proper wire connections are being made.
Note: Do not use metal wall plate with the switch, as it may
cause interference with the fan operation.
ATTENTION: The switch included with this ventilation fan
requires a neutral wire connection. If a neutral line is not
present, one must be run by a qualified electrician.
If you require assistance, please call 1-877-319-3757 before
attempting switch installation.
NOTE: This switch is intended to only operate independently
with this bath fan. Connections to other electrical fixtures are
prohibited and could cause electrical issues.
7. Connect a 4 in. circular duct and vent to the outside. Secure
it with duct tape or clamp.
Turn on power source.
8. Join the connectors for the BLUETOOTH
HomewerksWW.com
speaker.
®
7
5
6
7
8
Hide quick links:
Advertisement
Table of Contents
