HOME NETWERKS 7130-13-BT Instructions Manual page 8

NEW CONSTRUCTION INSTALLATION INSTRUCTIONS (continued)
9. Attach grille by pinching mounting springs and inserting
into narrow rectangular slots in the fan housing.
Turn on power source.
EXISTING CONSTRUCTION INSTALLATION INSTRUCTIONS
BEFORE INSTALLATION
WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to
the wires you are working on is shut off. Either remove the fuse
or turn off the circuit breaker before removing the existing bath
fan or installing the new one.
1. Remove existing fan.
2. Measure the opening to ensure it is large enough to accommo-
date the new fan housing (9-1/4 in. x 9-1/4 in.).
3. If this fan is not replacing an old fan, be sure to cut a
9-1/4 in. x 9-1/4 in. opening for the fan housing.
9
1
2
3
8
HomewerksWW.com