Operating Instructions; General Glass Information; Louvre Removal; Trim Removal - Vermont Castings A232 Installation Instructions & Homeowner's Manual

GENERAL GLASS INFORMATION

Only glass approved for use in these
products may be used for replacement.
1. The use of substitute glass will void all product
warranties.
2. Care must be taken to avoid breakage of the glass.
Under no circumstances should this fireplace
be operated without the front glass or with a
broken glass. Replacement of the glass (with
gasket) as supplied by the manufacturer
should be done by a licenced qualified
service person.

LOUVRE REMOVAL

A232
To remove louvres first remove the two (2) screws (Fig. 17)
fastening the louvre assembly to the fireplace. Lift the
louvre assembly straight out sliding the back guides out of
the fireplace body. (To reinstall, reverse).
Front View

TRIM REMOVAL

A232
1. Remove the two (2) outer 3/8" nuts holding the frame
window brass trim in place. (Fig. 18)
2. Remove the frame window brass trim by moving it
straight forward.

OPERATING INSTRUCTIONS

Screws
Fig. 17

GLASS REMOVAL

A232
1 . Remove frame window brass trim (See Trim Removal
section)
2. Remove remaining bottom 3/8" nut fat the bottom of
the frame window.
3. Remove 3/8" nut from each side of the frame window
(Fig. 18).
4. Remove frame window by pulling it forward and up.
OUTER NUTS
DRAWING 1
- 9 -
GLASS
FRAME
DRAWING 2
Side Nuts
BOTTOM NUT
Fig. 18