DENALI AIRE 1DAC6K User Manual page 14

5. Eco Button:
6. Power Button: Turn the air conditioner on and
off.
7. Filter Button: When the Filter Check light is off,
it is to press the Filter Check button.
the Filter Check light is on,
by pressing the Filter Check button. After
fan motor works for 500 total hours, the Filter
Check light will turn on to remind the user to clean
the filter.
8. Timer Button: Use these buttons on the control
panel and remote to set the Timer.
Timer Off: The timed stop is programmed by
pressing TIMER button. Set the rest time by
pressing the button
time displayed is to your demand then press
TIMER button again.
Timer On: When the unit is off, press TIMER
button at the first time, set the temperature with
pressing the button
button at the second time, set the rest time with
pressing the button
button at the third time, confirm the setting,
will show on the display.
Note: It can be set to automatically turn off or on
in 0.5-24 hours. Each press of the
buttons will increase or decrease the timer. The
Timer can be set in 0.5 hours increment below 10
hours and 1 hour increment for 10 hours or above.
The SET light will turn on while setting.
To cancel the set function, press the TIMER
button again.
can turn off
or until the rest
or . Press TIMER
or . Press TIMER
then it
9. Fan Speed Button:
to select the fan speed. In COOL MODE you can
choose the following settings: HI, MED, LO, or
AUTO. In Fan MODE you can choose from HI,
MED, and LO.
10. Directional Louvers:
to control horizontal airflow and the air deflectors
to control vertical airflow.
air deflector horizontal wheel
11
Press the FAN SPEED button
Use the horizontal wheels
air deflector